This post I will discuss about preventive CNC vertical machining center Fanuc robodrill. Below are the things that are very important to perform preventive maintenance.
- The panel of the machine, clean the inside and outside of the machine from dust with a soft cloth. Clean the fan and filter if the filter is clogged because there is no circulation of air which causes excessive heat in the panel, this will damage the components on the panel, especially on the heat sink.
- Part hydraulic. Hydraulic equipment in the CNC vertical machining center Fanuc robodrill to clamp material. Check the temperature at the pump hydraulic max 65 degrees Celsius if it exceeds clean the oil cooler from the dust. This is very important because if the temperature is too hot can damage the O-rings and seals on solenoid valves.
- Part lubrication. Need to check whether the lubrication to function properly, even though the machine will alarm if the oil is reduced lubrication, but should be in check. Because I’ve ever had the experience to the existing distributor lane dirt / dust that causes the lubrication is not perfect. Please know if this function does not work properly lubricating linear guide and ball screw quickly worn / damaged.
- The fan motor spindle. Parts are sometimes less in the note have occurred near the pulse coder bearing jam, it is because there is no cooling fan is not spinning because it is necessary in the clear well.
- The ATC (Automatic Tool Change) give the grease or lubrication on moving parts that tangent, the gear spindle to rotate the magazine.
- The telescopic. Check the tension bolts is also very important if the bolts are not tight telescopic be damaged, because the movement is very fast axis.
That’s all I can write about preventive maintenance of CNC Vertical Machining Centers if something is missing my friends can be added. It is based on the experience I can.
